Lucent Technologies OptiStar EdgeSwitch, Руководство пользователя

Страница: 205 / 330

Detailed FCIP Network Module CLI Reference Guide
365-575-925R1.5
Lucent Technologies
6 - 2 7
Issue 1, April 2002
Description:
The MRBS is the number of transmit buffers available for transmitting Class 2 or 3 frames to the attached
NxPort, for buffer-to-buffer flow control in the direction from the attached NxPort (if applicable) to FxPort. In
other words, this is the number of buffers calculated by dividing the maximum frame size into 34432 bytes that
are available on the FCIP Network Module to accept data frames from the connected device on the port. There
is a maximum of 16 receive buffers by default per port. If the user divides 3443 by 2112, the maximum frame
size, they get 16 buffers.
When this menu item is selected, the possible values are displayed.
[1..(34432/RBS)] Max Rx Buffers Range
MRBS [16] = Press the <Enter> key to keep the existing MRBS value.
In this example, the MRBS is set to 16. Press the <
Enter
> key to keep the current MRBS value, or enter a new
setting after the equal sign, then press the <
Enter
> key. The display will show OK, indicating the new value has
been accepted.
6.1.4.11 Configure Advanced Port Settings
Menu Path:
1) config
→
4) port
→
11) advanced
Shortcut Command:
At the root menu, type
config port advanced
Description:
When menu item
11) advanced – Configure Advanced Port Settings
is selected, the existing settings are displayed
(for help see Section 6.1.4.11.1 ) followed by the sub-menu shown below:
config/port/advanced
menu
1)
back - Go back
2)
show - Show advanced port settings (For help, go to Section 6.1.4.11.2 on page 6-28 )
3)
rbs - Set max receive buffer payload size (For help, go to Section 6.1.4.11.3 on page 6-29 )
4)
tbs - Set the maximum transmit buffers (For help, go to Section 6.1.4.11.4 on page 6-29 )
5)
edtov - Set error detection time-out value (For help, go to Section 6.1.4.11.5 on page 6-30 )
6)
ratov - Set resource allocation time-out value (For help, go to Section 6.1.4.11.6 on page 6-31 )
7)
altov - Set loop initialization time-out value (For help, go to Section 6.1.4.11.7 on page 6-32 )
8)
lpto - Set loop connection timeout (For help, go to Section 6.1.4.11.8 on page 6-32 )
9)
rxthrsh - Set the receive credit threshold (For help, go to Section 6.1.4.11.9 on page 6-33 )
10)
txthrsh - Set transmit available threshold (For help, go to Section 6.1.4.11.10 on page 6-33 )
11)
port - Set port number (For help, go to Section 6.1.4.11.11 on page 6-34 )
12)
speed - Set the port speed (For help, go to Section 6.1.4.11.12 on page 6-34 )
Enter a number from the
config/port/advanced
menu to go to the corresponding category.