Lucent Technologies OptiStar EdgeSwitch, Руководство пользователя

Страница: 88 / 330

4 - 2 6
Lucent Technologies
365-575-925R1.5
Issue 1, April 2002
Step 4
To verify that you have the desired OSPF General Parameter settings, from the main menu follow the
path:
[1] Operational Information & Status
→ → → →
[7] Routing Information
→ → → →
[4] OSPF Parameters
→ → → →
[1] Get OSPF Status
Step 5
Now go back to the
Set OSPF Parameters
menu (from the main menu
: [3] Configuration
→
→ →
→
[6]
Routing Configuration
→ → → →
[6] Set OSPF Parameters
) then select:
[4] OSPF Area Group
Æ
Æ Æ
Æ
[1] Add Area Entry
See your Network Administrator for a network schematic showing the OSPF Area assignments for
your network. Enter all OSPF Areas that will be assigned to OSPF Interfaces on this switch.
Note:
The Area ID will not be recognized by the switch unless it is entered as an
OSPF Area Entry
.
Step 6
To verify that the OSPF Area IDs have been entered correctly, from the main menu follow the path:
[1] Operational Information & Status
→ → → →
[7] Routing Information
→ → → →
[4] OSPF Parameters
→ → → →
[3] Current OSPF Area Status
Step 7
Return to the
Set OSPF Parameters
menu (from the main menu:
[3] Configuration
→
→ →
→
[6] Routing
Configuration
→ → → →
[6] Set OSPF Parameters
) then select:
[3] Interface Group
Æ
Æ Æ
Æ
[1] Add Interface Entry