Lucent Technologies OptiStar EdgeSwitch, Руководство пользователя

Страница: 162 / 330

5 - 4 8
Lucent Technologies
365-575-925R1.5
Issue 1, April 2002
5.3.9.3 Add Remote FCIP Network Module
Menu Path:
[3] Configuration
→
[9] FCIP Network Module Configuration
→
[3] Add Remote FCIP Network Module
Description:
The
Add Remote FCIP Network Module
menu item allows the user to add IP address and subnet mask
information about remote FCIP Network Modules to the local OptiStar EdgeSwitch. When this option is
selected from the
FCIP Network Module Configuration
menu, the following prompts will be displayed in
succession:
Enter the IP Address of Remote FCIP Network Module:
Enter the FCIP Network Module IP address of the remote FCIP Network Module. (
Note :
This IP address should
have been assigned when the remote module was initially configured at its local OptiStar EdgeSwitch.)
Enter the Subnet Mask of Remote FCIP Network Module:
Enter the subnet mask for the FCIP Network Module IP address that was assigned to the remote FCIP Network
Module. (
Note :
This subnet mask should have been assigned when the remote module was initially configured at
its local OptiStar EdgeSwitch.)
To check to see if the new information has been added correctly, you may view the
Remote FCIP Network Module
IP Parameters
( see Section 5.1.10.2, entitled “Remote FCIP Network Module IP Parameters” for help).
5.3.9.4 Delete Remote FCIP Network Module
Menu Path:
[3] Configuration
→
[9] FCIP Network Module Configuration
→
[4] Delete Remote FCIP Network Module
Description:
The
Delete Remote FCIP Network Module
menu item allows the user to delete information about remote
FCIP Network Modules from the local OptiStar EdgeSwitch. When this option is selected from the
FCIP
Network Module Configuration
menu, the following prompts will be displayed in succession:
Enter the IP Address of Remote FCIP Network Module:
Enter the FCIP Network Module IP address of the remote FCIP Network Module. (
Note :
This IP address should
have been assigned when the remote module was initially configured at its local OptiStar EdgeSwitch.)
Enter the Subnet Mask of Remote FCIP Network Module:
Enter the subnet mask for the FCIP Network Module IP address that was assigned to the remote FCIP Network
Module.
(
Note :
This subnet mask should have been assigned when the remote module was initially configured at its local
OptiStar EdgeSwitch.)
To check to see if the information has been deleted correctly, you may view the
Remote FCIP Network
Module IP Parameters
( see Section 5.1.10.2, entitled “Remote FCIP Network Module IP Parameters” for
help).