Lucent Technologies OptiStar EdgeSwitch, Руководство пользователя

Страница: 35 / 330

Product Overview
365-575-925R1.5
Lucent Technologies
1 - 9
Issue 1, April 2002
1.4.3.1 Features
The FCIP Network Module enables the OptiStar EdgeSwitch to support the following features:
•
Fibre Channel tunneling over OC-12c/STM-4c, OC-48c/STM-16c and Gigabit Ethernet WAN
links
•
Two 1 Gbps Fibre Channel switch ports per network module
•
Each Fibre Channel port can be a fabric port (F_Port), fabric loop port (FL_Port) or inter-
switch port (E_Port)
•
Fibre Channel port type can be automatically detected upon link initialization. Manual
configuration of port type is permitted.
•
Support for two LEDs per port
•
Support for Simple Name Server (SNS), Registered State Change Notification (RSCN) and
Fabric Shortest Path First (FSPF) fabric services
•
Support for WWN Zoning
•
SNMP management (SNMP v1)
1.4.3.1.1 Power On Self Test (POST)
During Power On Self Test (POST), the Fibre Channel over IP (FCIP) Network Module boots from the
Power-up Image file stored in Flash. When a new image file is downloaded to Flash, the FCIP Network Module
stores an Alternate (or backup) Image in FLASH as a fail-safe mechanism in case the new image is corrupted. If
POST fails two times in a row, the FCIP Network Module will automatically switch to the backup image. For
help in reloading the desired Image file, please refer to
Section 7.3.2.1 entitled “ How to Manually Select the
FCIP Network Module Firmware Boot Image ”.
POST Results may be viewed via either the CLI or the Web-based Management interface. For additional help on
viewing POST results, please refer to
Section 5.1.2.7.1 (for Host Module POST Results) or Section 5.1.2.7.2
(for Switching Module POST Results).
NOTE: If the POST is interrupted and not allowed to complete, the FCIP Network
Module will interpret this as a POST failure. If this happens twice in a row, the FCIP
Network Module will boot from the backup image in Flash.