Lucent Technologies OptiStar EdgeSwitch, Руководство пользователя

Страница: 125 / 330

Detailed OptiStar EdgeSwitch CLI Reference Guide
365-575-925R1.5
Lucent Technologies
5 - 1 1
Issue 1, April 2002
5.1.7.2 Static Routes
Menu Path:
[1] Operational Information & Status
→
[7] Routing Information
→
[2] Static Routes
Description:
This read-only table shows the static route entries for the OptiStar EdgeSwitch. To add a static route, from the
main menu follow the path:
[3] Configuration
→
[6] Routing Configuration
→
[1] Set Static Route
To delete a static route, from the main menu follow the path:
[3] Configuration
→
[6] Routing Configuration
→
[2] Delete Static Route
5.1.7.3 RIP General Parameters
The following 3 sections enable the user to view the current parameters for RIP, including general parameters,
the RIP interface status for each port (enabled/disabled) and the RIP route table.
5.1.7.3.1 RIP General Parameters
Menu Path:
[1] Operational Information & Status
→
[7] Routing Information
→
[3] RIP Parameters
→
[1] RIP General Parameters
Description:
This read-only table shows the current general parameters for RIP. To modify the parameters on this screen,
from the main menu follow the path:
[3] Configuration
→
[6] Routing Configuration
→
[5] Set RIP Parameters
→
[1] Set RIP General Parameters
5.1.7.3.2 RIP Interface Status
Menu Path:
[1] Operational Information & Status
→
[7] Routing Information
→
[3] RIP Parameters
→
[2] RIP Interface Status
Description:
This read-only table shows the RIP Interface Status (
Enabled
/
Disabled
) for each switching port on the OptiStar
EdgeSwitch. To modify the RIP Interface Status, from the main menu follow the path:
[3] Configuration
→
[6] Routing Configuration
→
[5] Set RIP Parameters
→
[2] Set RIP Interface Status