Lucent Technologies OptiStar EdgeSwitch, Руководство пользователя

Страница: 202 / 330

6 - 2 4
Lucent Technologies
365-575-925R1.5
Issue 1, April 2002
6.1.4.5 Set Port Number
Menu Path:
1) config
→
4) port
→
5) port
Shortcut Command:
At the root menu, type
config port port #
, where
#
is the desired Port Number.
Shortcut Example:
>
config port port 2
Description:
This menu item enables the user to change the port upon which the current port operations are being performed.
When this menu item is selected, the range is displayed, followed by the existing Port Number in brackets.
Port Number [1] =
In this example, all port operations are now being performed on Port 1. Press the <
Enter
> key to keep the
existing port, or enter a new port number after the equal sign, then press the <
Enter
> key. The display will show
OK, indicating the new number has been accepted.
6.1.4.6 Enable / Disable PLOGI/PRLI Probing
Menu Path:
1) config
→
4) port
→
6) prli
Shortcut Command:
At the root menu, type
config port prli #
, where
#
is the desired PRLI setting.
Description:
This menu item enables the user to change enable or disable PLOGI/PRLI (Port Login/Process Login service
parameter exchange). When PRLI is set to [1] true, the port will accept Fabric services. The N_Port (fabric
device) system that logs into the FCIP Network Module switch port will initiate a Service Parameter
(Process_Associators) exchange with another N_Port (fabric device) system. This exchange is stored in the
FCIP Network Module’s SNS table. When this menu item is selected, the possible values are displayed.
[1] true
[2] false
PRLI [1] =
In this example, the port will accept Fabric services. Press the <
Enter
> key to keep the current PRLI setting, or
enter a new setting after the equal sign, then press the <
Enter
> key. The display will show OK, indicating the
new setting has been accepted.