Lucent Technologies OptiStar EdgeSwitch, Руководство пользователя

Страница: 184 / 330

6 - 6
Lucent Technologies
365-575-925R1.5
Issue 1, April 2002
6.1.2.4 Set Event Log Severity Level
Menu Path:
1) config
→
2) event
→
4) event_sev
Shortcut Command:
At the root menu, type
config event event_sev #,
where
#
represents the desired Event Log Severity level
number (see available options in the Description section below).
Shortcut Example:
>
config event event_sev 5
Description:
The user can set the Event Log Severity level from a mark level [8] up to an emergency level [0]. FCIP Network
Modules have the option to restrict event logs to a minimum severity level. The nine possible levels are
described as follows:
Log Severity Levels Description
[0] emergency Immediate action required; system failing
[1] alert Unrecoverable condition reported; major event in progress
[2] critical Event failed with possible loss of integrity
[3] error Condition failed; action required
[4] warning Failed event occurred; no action required
[5] notify Configuration error or abnormal event occurred; no action required
[6] info Event occurred; no action required
[7] debug Internal message for development
[8] mark Message marker
The existing level is displayed in brackets at the prompt (in this example the severity level is set to
[5] notify
):
Event Log Severity [5] =
Press the <
Enter
> key to keep the current setting, or enter a new setting after the equal sign, then press the
<
Enter
> key. The display will show OK, indicating the new setting has been accepted.
6.1.2.5 Assign Severity Level to Fault LED
Menu Path:
1) config
→
2) event
→
5) led_sev
Shortcut Command:
At the root menu, type
config event led_sev #,
where
#
represents the desired Fault LED Severity level number
(see available options in the Description section below).
Shortcut Example:
>
config event led_sev 2