Lucent Technologies OptiStar EdgeSwitch, Руководство пользователя

Страница: 69 / 330

OptiStar EdgeSwitch Configuration
365-575-925R1.5
Lucent Technologies
4 - 7
Issue 1, April 2002
Example 2:
1. The user with User ID “optistar” is logged on to the CLI via the serial port.
2. The user with the User ID “red” successfully logs on to the CLI via telnet.
3. The user with the User ID “blue” also successfully logs on to the CLI via telnet.
4. The user with the User ID “red” tries to open a Web-based Management session but is denied, since the
telnet session already established for “red” in Step 2. has priority.
5. The user with the User ID “green” successfully logs on by opening a Web-based Management session.
6. The user with the User ID “green” successfully opens another Web-based Management session.
4.2.1.3 CLI Function Keys
The CLI interprets the
F1
,
F2
and
F3
function keys. The commands for each of these keys work on every screen
of the CLI.
Note:
You should only push a function key in either of the following scenarios:
(1) you would like to cancel any changes you have made to the current screen, or
(2) you have completed changing/updating the information on the current screen by hitting the
<Enter>
key
If the user presses an active function key before executing the final enter command, then the information to be
entered or changed will not be saved.
The CLI Function keys execute the following actions:
F1
Returns to Main Menu
F2
or
..
Returns to previous screen
(
Note:
entering the
..
command at the root menu is equivalent to using the
F3
key to exit the
system)
F3
Exits the system