Lucent Technologies OptiStar EdgeSwitch, Руководство пользователя

Страница: 192 / 330

6 - 1 4
Lucent Technologies
365-575-925R1.5
Issue 1, April 2002
Example
:
(config/zone/wwn/zoneset)>define “Backup”
(Enter 0 to exit)
backupNT [Y]:
6.1.3.3.4.7 Activate Zone Set
Menu Path:
1) config
→
3) zone
→
3) wwn
→
4) zoneset
→
7) activate
Shortcut Command:
At the root menu, type
config zone wwn zoneset activate
Shortcut Example:
>
config zone wwn zoneset activate “zone_set_1”
This example activates the (previously created) zone set named “zone_set_1”.
Description:
The menu item enables the user to activate the specified Zone Set (assuming no other Zone Set is already
enforced in the fabric). If another Zone Set is already enforced in the fabric, that Zone Set must be deactivated
before a new Zone Set can be activated. To verify that the Zone Set is enforced, type the following command
from the Root Menu:
config zone wwn show
or the following command from the Zone Set menu
(config/zone/wwn/zoneset):
senf
At this command, the switch activates the Zone Set on itself then attempts to force the Zone set onto other
switches in the fabric (Zone Merge). Once you have entered this command, press the down arrow key to scroll to
a message that states “
depress any key to cancel
”.
WARNING
: Striking any key at this point, including the
Enter key, will cancel the
activate
command.
If the
activate
command is completed successfully (<15 seconds), the message “
OK
” should be displayed. Once
a Zone Set is activated, it is stored in the temporary memory of all switches in the fabric. If the attempt is
unsuccessful, error messages appear, event messages are logged, and an isolated E_Port condition occurs, as
indicated by a blinking-green LED and solid-amber LED combination on the affected port. For a description of
the Zone Merge operation,
see Section 4.10.1.5 .
6.1.3.3.4.8 Deactivate Zone Set
Menu Path:
1) config
→
3) zone
→
3) wwn
→
4) zoneset
→
8) deactiv
Shortcut Command:
At the root menu, type
config zone wwn zoneset deactiv
Description:
This menu command deactivates the current active zone set. Since only one zone set can be active in the fabric
at any given time, this command does not need an argument. Once you have entered this command, press the