Chapter 6: Using the Web Interface
297
Field/setting
Description
Click this button to import a certificate file. Then
you can:
Click Show to view the certificate's content.
Click Remove to delete the installed certificate
if it is inappropriate.
Allow expired and
not yet valid
certificates
Select this checkbox to make the
authentication succeed regardless of the
certificate's validity period.
After deselecting this checkbox, the
authentication fails whenever any certificate in
the selected certificate chain is outdated or not
valid yet.
Allow connection if
system clock is
incorrect
When this checkbox is deselected, and if the
system time is incorrect, the installed TLS
certificate is considered not valid yet and will
cause the wireless network connection to fail.
When this checkbox is selected, it will make the
wireless network connection successful when the
PX3 system time is earlier than the firmware build
before synchronizing with any NTP server.
The incorrect system time issue may occur
when the PX3 has once been powered off for a
long time.
IPv4 settings:
Field/setting
Description
Enable IPv4
Enable or disable the IPv4 protocol.
IP auto
configuration
Select the method to configure IPv4 settings.
DHCP: Auto-configure IPv4 settings via DHCP
servers.
Static: Manually configure the IPv4 settings.
Preferred
hostname
Enter the hostname you prefer for IPv4
connectivity
DHCP settings: Optionally specify the preferred hostname, which
must meet the following requirements:
Consists of alphanumeric characters and/or hyphens
Cannot begin or end with a hyphen
Содержание Raritan PX3-3000 Series
