Keysight N9923A Скачать руководство пользователя страница 203

Страница: 203 / 276

Keysight N9923-90001 User’s Guide

203

File Management
Saving and Recalling Files

— Then choose from the following:

—

Edit Prefix

to edit the prefix using the labeler. For more information,

refer to

“How to edit the Prefix and Suffix (Auto Append)” on

page 202

and

“How to use the FieldFox labeler ” on page 193

——

Select

to add the cursor character to the end of the Prefix.

——

Back Space

to delete the last character(s) from the end of the

prefix.

——

Shift

to toggle between capital letters and lower case letters.

——

Alt Keywords

to display the different preselected keywords

(File, Site, and so forth) can be selected just like a single

character. These keywords can also be edited. See Edit
Keywords.

——

Cancel

to cancel edits and return to the previous menu.

—

Auto Append

(Suffix)

—

OFF

to turn off Auto Append.

—

Number

to auto-append a number using format “_nnn” sequentially to

all saved files.

—

Date

to auto-append a date and time using format

“_YYYY-MM-DD.HH.MM.SS” sequentially to all saved files.

—

Number Suffix Reset

to reset Auto Append number to “_001”.

—

Prefix

—

OFF

to disable the prefix. The Prefix softkeys are grayed out (inactive).

Refer to How to enable/disable the Prefix (persistent) in

“How to

enable/disable the Prefix (persistent)” on page 204

—

Last File

to use the last filename saved, as your filename for

subsequent saved filenames.

—

User

to use the user-selected prefix.

—

Back

to return to the previous menu.

How to move the cursor

— Use the rotary knob to move cursor on the same row.

— Use the

arrows to move the cursor up and down the rows.

When Last File is selected, the Edit Prefix and Auto Append softkeys are

unavailable (grayed out). Refer to

“Prefixes and Suffixes for Filenames” on

page 202

Содержание N9923A





















































































































































































































































































Результаты поиска

Содержание N9923A

Отзывы:

Keysight N9923A, Руководство пользователя, Страница: 203 / 276

Результаты поиска

Содержание N9923A

Отзывы: