Keysight N9923A Скачать руководство пользователя страница 18

Страница: 18 / 276

18 Keysight N9923-90001 User’s Guide

Overview
FieldFox Manuals, Software, and Supplemental Help

To see a complete list of accessories that are available for the FieldFox, please

visit:

http://www.keysight.com/find/fieldfox

FieldFox Manuals, Software, and Supplemental Help

The following manuals and software are available for the FieldFox.

To access all of these, visit:

www.keysight.com/find/fieldfoxsupport

Check the manual revision on the first page of each manual.

—

User’s Guide

–This manual, included with shipment.

—

Quick Reference Guide

– Printed copy with laminated pages for outdoor

use included with shipment.

—

Supplemental Online Help

- Concepts and Reference information.

Programming Guide – Online, off line and pdf versions.

http://na.support.keysight.com/fieldfox/help/SupHelp/FieldFox.htm

—

FieldFox Data Link Software and Help

– Free download.

—

Service Guide

– Free download.

—

Firmware Updates

– Check to see if you have the latest FieldFox firmware.

Conventions that are used in the Manual

—

Hardkey

indicates a front panel button. The functionality of these buttons

does not change.

The six Softkey menus change dynamically and follow these color
conventions:

—

Softkey

Blue indicates an available setting.

—

Softkey

Green indicates a change in menu level when selected.

—

Softkey

Black indicates the default or selected setting.

N9910X–884

Instrument Shoulder Strap

N9910X–890

User’s Guide (printed copy)

N9910X–891

Quick Reference Guide (printed copy)

Table 1-1

Accessories

Accessory Part

Number

Description

Although not supplied, a USB keyboard and mouse CAN be used with the

FieldFox.

Содержание N9923A





















































































































































































































































































Результаты поиска

Содержание N9923A

Отзывы:

Keysight N9923A, Руководство пользователя, Страница: 18 / 276

Результаты поиска

Содержание N9923A

Отзывы: