GILLIG LOW FLOOR, Руководство по обслуживанию

Страница: 54 / 506

Preventive Maintenance
54
Body and Chassis
Lubricate wiper arm pivot posts ............................................... Every 6,000 miles
Inspect body for fluid leaks ....................................................... Every 6,000 miles
Wash underbody and inspect for damage and corrosion ........... Every 12,000 miles or as needed
*
Inspect fenders and splash aprons ............................................. Every 24,000 miles
Check wiper arm adjustment .................................................... Every 24,000 miles
Inspect welds on frame, brackets, etc. ...................................... Every 30,000 miles
Check bumper mounting fastener torque .................................. Every 42,000 miles
Check floor covering seam sealing ........................................... Every year
Reseal floor covering ................................................................ Every 3 years or as needed
* Washing and inspection of the underbody should be done more often in areas with severe corrosion
problems. If your city, county, or state uses magnesium chloride as a de-icer, it is ESSENTIAL that
the underbody and engine compartment be washed and inspected frequently. Gillig does not warrant
its vehicles (structure, body, metal components, electrical and electronic components, etc.) against
corrosion/deterioration caused by magnesium chloride or similar de-icers unless the preventive
maintenance described in Chapter 11 is adhered to, including the anual reporting to Gillig. See your
specific warranty documents for details.
Doors
Check door panel alignment ..................................................... Every 6,000 miles
Inspect door seals for leaks or damage ..................................... Every 6,000 miles
Inspect door sensitive edge ....................................................... Every 6,000 miles
Test emergency door release mechanisms ................................ Every 12,000 miles
Check door motor and base plate fasteners ............................... Every 18,000 miles
Inspect air lines and connectors for leaks ................................. Every 18,000 miles