GILLIG LOW FLOOR, Руководство по обслуживанию

Страница: 498 / 506

Body and Interior
498
Figure 11-38, Wheelchair Securement Systems
wAr
NiNg
0
9
9
8
7
7
6
5
4
4
3
2
2
Shoulder Belt
Flip-up Seat Assembly
Stop Request Tape
Flip-Up Mechanism Release Lever
Lock Pin
Slide Arm
Front Tie-Down Belts
Lap belt
Wheelchair Restraint Belts
Lap Belt Clip
Belt Release Handle
0
9
8
7
6
5
4
3
2
Wheelchair Securement Systems
For the ensured safety of disabled passengers and in compliance with Americans with Disabilities Act
(ADA) standards, the bus is equipped with wheelchair securement systems that secure wheelchairs and
three-wheelers in a designated area of the coach.
The wheelchair securement systems are located in an area made vacant by folding seats. The folding
seats lock into position. The only maintenance required is periodic inspection for damage and security of
the fasteners. See the Driver’s Handbook for wheelchair securement procedures.
Replacements for the retractors and belts used in these systems are available by calling your Gillig Parts
representative. The rear wheelchair restraints have their belts attached to the T-pedestal legs of the flip-
up seats. The forward restraints are mounted on the sliding arm (mounted on the floor) of the restraint
system. Each wheelchair position has four hooks, a lap belt,
and a shoulder harness (see Figure 11-38).