GILLIG LOW FLOOR, Руководство по обслуживанию

Страница: 387 / 506

Electrical System
387
l2-rf-Net-r2 wireless communication module
The optional L2-RF-NET-R2 Wireless Communication
Module (Figure 9-33) allows you to communicate with
the bus via a Palm handheld. The ladder logic of the I/O
system is available on the Palm handheld in real time. Bus
functions, such as opening the door or kneeling the bus
can be controlled via the software on the Palm.
Figure 9-33, L2-RF-NET-R2
Wireless Communication Module
Figure 9-32, T2-DIO-PWM-888-K7 Headlight Control Pulse-Width Modulation Module
t2-dio-pwm-888-K7 control module with pulse width modulation
The T2-DIO-PWM-888-K7 Control Module (Figure 9- 32) provides low voltage (8V) to outputs 6 and
8 for low-beam headlighs, significantly increasing bulb life. The voltage pulse width, instead of a con -
stant 12 volts, is digitally modulated and programmable for a desired percentage of duty cycle. This
module controls high beam headlights, panel lights, stop request lights, marker lights, and front stepwell
heater(s).