GILLIG LOW FLOOR, Руководство по обслуживанию

Страница: 49 / 506

Preventive Maintenance
49
Steering/Front Axle
Check pitman arm for wear or damage ..................................... Every 6,000 miles
Grease drag link and steering arms ........................................... Every 10,000 miles
Lubricate steering column U-joints and shaft ........................... Every 12,000 miles
Check steering gear mounting bolt torque ................................ Every 12,000 miles
Check tie rod ends for wear and loose nuts .............................. Every 12,000 miles
Check steering arms for wear or damage .................................. Every 12,000 miles
Lubricate steering intermediate shaft ........................................ Every 12,000 miles
Grease behind output shaft dirt-and-water seal ....................... Every 24,000 miles
Inspect steering shaft seal ......................................................... Every 24,000 miles
Grease wheel bearings .............................................................. Every 30,000 miles
Grease tie rod arm ends ............................................................. Every 50,000 miles
Grease knuckle pins (king pins) ................................................ Every 50,000 miles
Drive Axle (763)
Check gear oil in drive axle
*
..................................................... Every 5,000 miles
Change gear oil in drive axle
*†
City Service ......................................................................... Every 25,000 miles or annually
(whichever comes first)
City Service with Synthetic oil ........................................... Every 100,000 miles or every 2 years
(whichever comes first)
Highway Service ................................................................. Every 100,000 miles or annually
(whichever comes first)
Highway Service with Synthetic Oil ................................... Every 250,000 miles or every 4 years
(whichever comes first)
Inspect seals and gaskets for leaks ............................................ Every 6,000 miles
Check axle mounting fastener torque ....................................... Every 24,000 miles
Check axle flange nut torque ..................................................... Every 24,000 miles
Clean differential breather ........................................................ Every 42,000 miles
* No break-in oil change is needed. Check magnetic drain plugs, breathers, seals, and temperature
indicators during regularly-scheduled oil checks and changes.
† Fill Meritor axles with Meritor-specified lubricants only! See Specifications chapter for more
information.