GILLIG LOW FLOOR, Руководство по обслуживанию

Страница: 124 / 506

24
Transmission/Driveline/Rear Axle
Fluid and Filter Change
1. Operate the transmission until the fluid is at the normal operating temperature (140°F). Hot fluid
flows more quickly and drains more completely.
2. Shift the transmission to Neutral (N), apply the brake, and stop the engine.
Transmission fluid is hot! Take precautions to prevent being scalded.
3. Remove drain plug
1
from the transmission pan and allow the fluid to drain into a suitable con -
tainer.
4. Remove drain plug
2
for the converter and drain the
fluid. The plug is accessible through the transmission
pan drain hole.
5. Examine the fluid for contamination. A normal amount
of condensation will appear in the fluid during opera -
tion.
6. Inspect the copper washers for the drain plugs and
replace if necessary. Install drain plugs
2
and
1
.
Tighten drain plug
2
to 36 lb-ft (49 N-m) and drain
plug
1
to 73 lb-ft (97 N-m).
7. Remove the oil filter, and replace with a new one. In -
stall the filter per instructions provided with the filter.
8. Refill the transmission through the dipstick fill tube.
Follow the proper transmission fluid check procedures
as described in the previous “Transmission Fluid Con -
dition” sections.
Figure 4-5, Transmission Drain Plugs
2
1
1