5 - 50
CHAS
4. Install:
• Ring nut
1
Tighten the ring nut using the ring nut
wrench
2
.
Refer to “STEERING HEAD INSPEC-
TION AND ADJUSTMENT” section in the
CHAPTER 3.
T
R
.
.
7 Nm (0.7 m · kg, 5.1 ft · lb)
5. Check the steering shaft by turning it lock
to lock. If there is any binding, remove the
steering shaft assembly and inspect the
steering bearings.
6. Install:
• Plain washer
1
7. Install:
• Front fork
1
• Handle crown
2
• Main switch
3
• Hose guide bracket
4
NOTE:
• Temporarily tighten the pinch bolts (under
bracket).
• Do not tighten the pinch bolts (handle crown)
yet.
8. Install:
• Guide (speed sensor lead)
1
NOTE:
After installing the guide as shown, pass the
speed sensor lead through the guide.
1
STEERING
