4 - 84
ENG
5. Install:
• Bolt (starter clutch)
1
• Plain washer (rotor)
• Nut (rotor)
2
Use the sheave holder
3
.
NOTE:
Tighten the rotor nut to 65 Nm (6.5 m • kg,
47 ft • lb), loosen and retighten the rotor nut to
65 Nm (6.5 m • kg, 47 ft • lb).
Sheave holder:
YS-1880-A/90890-01701
1
1
3
2
T
R
.
.
16 Nm (1.6 m · kg, 11 ft · lb)
T
R
.
.
65 Nm (6.5 m · kg, 47 ft · lb)
6. Install:
• Shaft
1
• Bearing
2
• Idle gear 2
3
NOTE:
Apply the engine oil on the shaft, bearing and
idle gear inner circumference.
7. Install:
• Dowel pin
• Gasket [crankcase cover (left)]
• Crankcase cover (left)
1
• Bolt [crankcase cover (left)]
NOTE:
Tighten the bolts in stage, using a crisscross
pattern.
New
T
R
.
.
10 Nm (1.0 m · kg, 7.2 ft · lb)
8. Install:
• Plain washer
• Torque limiter
1
• Plain washer
NOTE:
Apply the engine oil to the shaft and plain
washers.
1
AC MAGNETO AND STARTER CLUTCH
