3 - 57
INSP
ADJ
REPLACING THE HEADLIGHT BULBS
3. Replace:
• Blown fuse
WARNING
Never use a fuse with an amperage rating
other than that specified. Improvising or
using a fuse with the wrong amperage rat-
ing may cause extensive damage to the
electrical system, cause the starting and
ignition systems to malfunction and could
possibly cause a fire.
4. Install:
• Fuse cover
• Seat
Replacement steps:
• Set the main switch to “OFF”.
• Install a new fuse of the correct amperage.
• Set on the switches to verify if the electri-
cal circuit is operational.
• If the fuse immediately blows again, check
the electrical circuit.
Items
Amperage
rating
Q’ty
Main fuse
10 A
1
REPLACING THE HEADLIGHT BULBS
1. Remove:
• Headlight
Refer to “SEAT, FUEL TANK AND SIDE
COVERS” section in the CHAPTER 4.
2. Remove:
• Headlight bulb holder cover
1
3. Detach:
• Headlight bulb holder
1
4. Remove:
• Headlight bulb
2
WARNING
Since the headlight bulb gets extremely
hot, keep flammable products and your
hands away from the bulb unit it has cooled
down.
