5 - 41
CHAS
HANDLEBAR
EC5B5000
ASSEMBLY AND INSTALLATION
Handlebar
1. Install:
• Handlebar holder (lower)
1
• Plain washer
2
• Nut [handlebar holder (lower)]
3
NOTE:
• Install the handlebar holder (lower) with its
side having the greater distance
a
from the
mounting bolt center facing forward.
• Apply the lithium soap base grease on the
thread of the handlebar holder (lower).
• Installing the handlebar holder (lower) in the
reverse direction allows the front-to-rear off-
set amount of the handlebar position to be
changed.
• Do not tighten the nut yet.
2. Install:
• Handlebar
1
• Handlebar holder (upper)
2
• Bolt [handlebar holder (upper)]
3
NOTE:
• The handlebar holder (upper) should be
installed with the punched mark
a
forward.
• Install the handlebar so that the marks
b
are
in place on both sides.
• First tighten the bolts on the front side of the
handlebar holder (upper), and then tighten
the bolts on the rear side.
T
R
.
.
28 Nm (2.8 m · kg, 20 ft · lb)
