manualshive.com logo in svg

Xerox workcentre 5335 series, Service Manual

The Xerox WorkCentre 5335 series is an advanced multifunction printer designed for efficient office workflows. With its exceptional performance, this versatile machine offers a plethora of functionalities. Looking for a service manual? Download the comprehensive and user-friendly manual for free from manualshive.com to get the most out of your device.

Share
Download
background image

BUS Updated 12/2011

07/2011

6-66

WorkCentre 5335 Family Service Documentation

Glossary of Terms

Initial Issue

General Procedures & Information

CPLD

Complex Programmable Logic Device - a programmable logic device with 
complexity between that of PALs and FPGAs, and architectural features of 
both. The building block of a CPLD is the macro cell, which contains logic 
implementing disjunctive normal form expressions and more specialized 
logic operations.

CRU

Customer Replaceable Unit 

CRUM

Customer Replaceable Unit Memory

CYMK

Toner colors for machine; Y=yellow, C=cyan, M=magenta, and K=black

DADF

Duplexing Automatic Document Feeder

DC

Direct Current is type of power for machine components. Machine converts 
AC power from power source to DC power.

DIMM

Dual In-line Memory Module - a series of dynamic random access memory 
integrated circuits. 

DLD

Download Direct Method - Down Load Direct (DLD) was developed to 
accelerate downloads 

DMA

Direct memory access (DMA) is a feature of modern computers and micro-
processors that allows certain hardware subsystems within the computer to 
access system memory for reading and/or writing independently of the cen-
tral processing unit.

DMM

Digital Multimeter is generic name for meter that measures voltage, current, 
or electrical resistance.

DNS

Domain Name System  - a hierarchical naming system for computers, ser-
vices, or any resource connected to the Internet or a private network. It 
associates various information with domain names assigned to each of the 
participants. Most importantly, it translates domain names meaningful to 
humans into the numerical (binary) identifiers associated with networking 
equipment for the purpose of locating and addressing these devices world-
wide.

DTMF

Dual-Tone Multi-Frequency signaling  - is used for telecommunication sig-
naling over analog telephone lines in the voice-frequency band between 
telephone handsets and other communications devices and the switching 
center.

Duplex

2-sided printing or copying

EA

Emulsion Aggregation (toner)

EEPROM

Electrically Erasable Programmable Read-Only Memory - a type of non-vol-
atile memory used in computers and other electronic devices to store small 
amounts of data that must be saved when power is removed, e.g., calibra-
tion tables or device configuration.

EME

Electromagnetic Emissions are emitted from machine during normal opera-
tion and power of these emissions are reduced by machine design features.

ESD

Electrostatic Discharge. A transfer of charge between bodies at different 
electrostatic potential.

ESG

European Solutions Group - also referred to as XE (Xerox Europe)

FE

Field Engineer

Table 1 Glossary

Term

Description

FIFO

First In, First Out - an abstraction in ways of organizing and manipulation of 
data relative to time and prioritization. This expression describes the princi-
ple of a queue processing technique or servicing conflicting demands by 
ordering process by first-come, first-served (FCFS) behaviour: what comes 
in first is handled first, what comes in next waits until the first is finished, etc.

FoIP

FAX Over Internet Protocol

FPGA

Field-Programmable Gate Array - an integrated circuit designed to be con-
figured by the customer or designer after manufacturing

FS

Fast Scan (direction) - LE - to - TE

FTP

File Transfer Protocol  - a standard network protocol used to exchange and 
manipulate files over a TCP/IP-based network, such as the Internet.

GND

Ground

HCF

High Capacity Feeder

HDD

Hard Disk Drive

HFSI

High Frequency Service Item

HGEA

High Grade Emulsion Aggregation (toner)

HVPS

High Voltage Power Supply

Hz

Hertz (Cycles per second)

IBT

Intermediate Belt Transfer

I/F

Interface

IIO

Intermediate Image Overwrite

IIT

Image Input Terminal - the Scanner/CCD portion of the machine

IPSEC

Internet Protocol Security  - a protocol suite for securing Internet Protocol 
(IP) communications by authenticating and encrypting each IP packet of a 
data stream. IPsec also includes protocols for establishing mutual authenti-
cation between agents at the beginning of the session and negotiation of 
cryptographic keys to be used during the session.

IOT

Image Output Terminal - the ROS/Xero/paper handling/ fusing portion of the 
machine

IM

Image Management Software - Windows and Macintosh software for view-
ing, organizing, cataloging, managing, browsing, storing, sharing, and print-
ing images.

IPS

Image Processing Subsystem

IQ

Image Quality

JBA

Job-based Accounting

JBIG

Joint Bi-level Image Experts Group - JBIG was designed for compression of 
binary images, particularly for faxes, but can also be used on other images.

KC

1000 copies

Kerberos

a computer network authentication protocol, which allows nodes communi-
cating over a non-secure network to prove their identity to one another in a 
secure manner.

LCD

Liquid Crystal Display

Table 1 Glossary

Term

Description

Summary of Contents for workcentre 5335 series










































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for workcentre 5335 series

Canon imagePROGRAF iPF8400 Basic Manual preview
imagePROGRAF iPF8400
Brand: Canon Pages: 157
Canon JX210P On-Screen Manual preview
JX210P
Brand: Canon Pages: 91
Samsung CLP-680ND: CLP-775ND Quick Installaion Manual preview
CLP-680ND: CLP-775ND
Brand: Samsung Pages: 2
Oce COLOR SYSTEM 110 Operator'S Manual preview
COLOR SYSTEM 110
Brand: Oce Pages: 392
Oki C7550 Reference Manual preview
C7550
Brand: Oki Pages: 45
Oki C6150 Series Reference Manual preview
C6150 Series
Brand: Oki Pages: 104
Oki MPS480mb Manual De L'Utilisateur preview
MPS480mb
Brand: Oki Pages: 197
Lexmark X295 Service Manual preview
X295
Brand: Lexmark Pages: 500
Ricoh P 501 Setup Manual preview
P 501
Brand: Ricoh Pages: 24
Xerox Phaser 5550 Quick Use Manual preview
Phaser 5550
Brand: Xerox Pages: 6
Intellisystem ThermalTronix TT-1025EX-MIL User Manual preview
ThermalTronix TT-1025EX-MIL
Brand: Intellisystem Pages: 11
POSBank A7EN User Manual preview
A7EN
Brand: POSBank Pages: 9
Mita DP-1400 Instruction Handbook Manual preview
DP-1400
Brand: Mita Pages: 134
Ricoh IM C6500 Operating Instructions Manual preview
IM C6500
Brand: Ricoh Pages: 24
Kyocera KM-C2525E Service Manual preview
KM-C2525E
Brand: Kyocera Pages: 12
Konica Minolta Bizhub C20P Quick Manual preview
Bizhub C20P
Brand: Konica Minolta Pages: 46
Xerox Nuvera 100 roduction Systems Paper Manual preview
Nuvera 100 roduction Systems
Brand: Xerox Pages: 70
Output Technology LaserMatrix LM2405 Operator'S Manual preview
LaserMatrix LM2405
Brand: Output Technology Pages: 249

Brands by name

Popular brands

Load more brands