BUS Updated 12/2011
07/2011
4-175
WorkCentre 5335 Family Service Documentation
REP 13.37, REP 13.38
Repairs & Adjustments
Initial Issue
Figure 4 Removing the Stapler
Replacement
1.
Reverse the removal procedure for replacement.
2.
Perform
ADJ 12.2
Finisher LX Booklet Crease/Staple Position
REP 13.38 Booklet Stapler Move Motor (Office Finisher LX)
Parts List on
PL 23.18
Removal
1.
Switch off the power and disconnect the power cord.
2.
Remove the Booklet Maker Assembly from the Finisher (
REP 13.31
).
3.
Remove the Cover for the Booklet Stapler Move Motor (
Figure 1
).
(1) Remove the Screw (1).
(2) Remove the Cover.
Figure 1 Removing the Cover
4.
Remove the Booklet Stapler Move Motor (
Figure 2
).
(1) Open the Clip and release the wires.
(2) Disconnect the Connector.
(3) Remove the Screws (3).
(4) Remove the Booklet Stapler Move Motor.
Clip
Connector
Screws
Stapler
Screw
Cover