manualshive.com logo in svg

Xerox workcentre 5335 series, Service Manual

The Xerox WorkCentre 5335 series is an advanced multifunction printer designed for efficient office workflows. With its exceptional performance, this versatile machine offers a plethora of functionalities. Looking for a service manual? Download the comprehensive and user-friendly manual for free from manualshive.com to get the most out of your device.

Share
Download
background image

BUS Updated 12/2011

07/2011

2-1028

WorkCentre 5335 Family Service Documentation

OF 16-1

Initial Issue

Status Indicator RAPs

Check for Centreware Internet Services Failure

The following describes the situations and corrective actions when a failure occurs when "Cen-
treWare Internet Services" is used.

Check for Scanning Failure

1.

When a document is retrieved from a Mailbox

•

If [Save] is set for [Delete Document After Retrieval], multiple clients can access to
the same document.

•

If [Delete] is set for [Delete Document After Retrieval], only 1 client can access to the
same document. The document stored or read by a client cannot be viewed from the
other clients.

In both cases, documents can be added to the accessed Mailbox.

•

The documents that have been retrieved using CentreWare Internet Services will not
be deleted regardless of the setting in [Delete Document After Retrieval].

2.

Screen Display

When the document with a lot of colors is scanned, they cannot be displayed properly in
the display mode that displays using fewer colors than the scanned colors. Use the dis-
play mode that allows displaying using more colors than the colors used in the image.

3.

A network scanner driver and Mailbox Viewer 2 are used at the same time.

When a computer uses a network scanner driver and Mailbox Viewer 2 at the same time,
the computer cannot connect to the printer.

When multiple computers use the network scanner drivers or Mailbox Viewer 2 to retrieve
documents from the same machine at the same time, up to 3 computers can be con-
nected.

4.

When the documents stored in Mailbox is printed

When stored documents are to be printed (the documents are to be retrieved) by select-
ing [Mailbox] from the machine touch panel display, scanned documents cannot be
printed.

5.

When a TIFF file is used

The TIFF files that have been created using CentreWare Scan Services or Mailbox
Viewer 2 are compressed using the MMR, MH, JBIG, or JPEG compression method. To
open a TIFF file, use the application software applicable for those compression methods.

NOTE: JBIG compressed TIFF files cannot be created in Mailbox Viewer 2.

6.

Restrictions on Scan Capacity and No. of Sheets

The maximum read capacity for a page is 297x432mm. A3 or 11”x17" for the standard
size

The Mailbox method allows up to 999 sheets to be read in a single scan operation.

Check for Mail Failure

Corrective Action

Table 10 CWIS

Symptoms

Corrective Action

Cannot be connected to "Cen-
treWare Internet Services".

Check that the machine is operating properly. Check that the 
machine is turned ON.

Same as above

Check that "Internet Services" is activated. Print the "System 
Settings List" for checking.

Same as above

Check that the Internet address has been entered properly. 
Check the Internet address again. If connection is not suc-
cessful, enter the IP address and try connection.

Same as above

Check if a proxy server is used. Some proxy servers disable 
connection. When proxy server is not used, set the Web 
browser to "Do not use proxy server" or set the used address 
to "Do not use proxy server".

[Wait for a while] appears and 
stays.

Wait for a while without any action. If the situation has not 
been changed, select the [Refresh] button. If the situation 
does not change after selecting the [Refresh] button, check if 
the machine is operating properly.

The [Refresh] button is not 
functioning. Or, even if a 
menu in the left frame is 
selected, the right frame can-
not be refreshed.

Check that the specified Web browser is used. Refer to "Com-
munication (Port/Protocol) Setting Items in CentreWare Inter-
net Services" in User Guide to check the used Web browser is 
supported.

The screen display collapses. Change the Web browser window size.

The latest information is not 
displayed.

Select the [Refresh] button.

Selecting the [Apply new set-
tings] button does not reflect 
settings.

Check that the entered values are correct. If invalid values 
have been entered, they are automatically changed to values 
within the limit range.

Same as above

Check that the machine is operating or has completed opera-
tion using the machine Operation Panel. If Auto Reset func-
tion is set, the settings in CentreWare Internet Services will 
not be applied until the specified time has passed. Wait for a 
while.

Selecting [Apply new set-
tings] button displays a mes-
sage such as [Invalid or 
unrecognizable response was 
returned from the server] or 
[No data found] on the Web 
browser.

1. Check if the password is correct. The password confirma-
tion entry does not match. Enter a correct password. 2. 
Restart the machine.

Jobs cannot be deleted.

Wait for a while and then select the [Refresh] button.

Summary of Contents for workcentre 5335 series










































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for workcentre 5335 series

Xerox D125 User Manual preview
D125
Brand: Xerox Pages: 310
Xerox AS/400 Installation And Setup Manual preview
AS/400
Brand: Xerox Pages: 23
IBM 6400 Series Operator'S Manual preview
6400 Series
Brand: IBM Pages: 113
IBM 6400 Series Owner'S Manual preview
6400 Series
Brand: IBM Pages: 16
IBM 6400 Series User Manual preview
6400 Series
Brand: IBM Pages: 214
Oki OKIPAGE 8p Plus Setup Manual preview
OKIPAGE 8p Plus
Brand: Oki Pages: 18
BIO RAD VERSADOC User Manual preview
VERSADOC
Brand: BIO RAD Pages: 61
Olivetti PG L2555 Service Manual preview
PG L2555
Brand: Olivetti Pages: 293
Ricoh Aficio 1224C Operating Instructions Manual preview
Aficio 1224C
Brand: Ricoh Pages: 130
DNP DP-DS80D Startup Manual preview
DP-DS80D
Brand: DNP Pages: 33
Ricoh SP 213Nw Setup Manual preview
SP 213Nw
Brand: Ricoh Pages: 23
BT PaperJet 65E User Manual preview
PaperJet 65E
Brand: BT Pages: 64
Brightek T1 Quick Install Manual preview
T1
Brand: Brightek Pages: 8
Brightek E26 Quick Install Manual preview
E26
Brand: Brightek Pages: 8
Brightek E23 Quick Install Manual preview
E23
Brand: Brightek Pages: 8
Brightek E17 Quick Install Manual preview
E17
Brand: Brightek Pages: 8
Lexmark 23S0300 Features preview
23S0300
Brand: Lexmark Pages: 4
WOOSIM WSP-W40 Operator'S Manual preview
WSP-W40
Brand: WOOSIM Pages: 20

Brands by name

Popular brands

Load more brands