Sindoh D310 Series, User Manual, Page: 95 / 324

8.7 Configuring a setting to make prints from an Android terminal using Mopria 8
[Web Management Tool] 8-14
8.7 Configuring a setting to make prints from an Android terminal us-
ing Mopria
Mopria is a standard that enables printing from an Android terminal by wireless connection without having to
install a dedicated application such as a printer driver to suit the manufacturer or model of an Android termi-
nal.
You can automatically detect an MFP or printer compatible with Mopria on the same network from an Android
terminal to make prints, thereby, reducing the user's or administrator's load.
To use the Mopria print function, the following preparation is required.
- Installing Mopria Print Service in the Android terminal (Android 4.4 or later)
-
In the administrator mode, select [Network] - [Mopria Setting] - [Mopria Setting], then set [Mobile Device
Request Response Setting] to [ON] (Default: [OFF]).
Tips
If [Mopria Setting] - [Mobile Device Request Response Setting] is changed to [ON], the following settings are
also enabled synchronously. If one of the following settings is changed to Disable, [Mobile Device Request
Response Setting] is also changed to [OFF] synchronously. However, when [Mobile Device Request Re-
sponse Setting] is changed to [OFF], the following setting is not changed synchronously.
-
[Network] - [IPP Setting] - [IPP Setting] - [IPP Setting] in administrator mode
- [Network] - [IPP Setting] - [IPP Setting] - [Accept IPP job] in administrator mode
-
[Network] - [Bonjour Setting] - [Bonjour Setting] - [Bonjour] in administrator mode