Sindoh D310 Series, User Manual, Page: 307 / 324

16.10 Associating with the remote diagnosis system 16
[Web Management Tool] 16-16
16.10 Associating with the remote diagnosis system
16.10.1 Registering a proxy server used for remote diagnosis
To use a proxy server for using a service that diagnoses the machine status remotely, register the proxy serv-
er information with this machine.
A proxy server used for WebDAV transmission can also be used as a proxy server for remote diagnosis. You
can also a different proxy server.
In the administrator mode, select [Network] - [WebDAV Settings] - [Proxy Setting for Remote Access], then
configure the following settings.
16.10.2 Allowing acquisition of the machine counter
When using a service that diagnoses the machine status remotely, the counter information managed by this
machine can be acquired from the remote diagnosis system.
In the administrator mode, select [User Authentication/Account Track] - [Counter Remote Control], and set
[Counter Remote Control] to [Allow] (Default: [Restrict]).
Tips
- This setting is available if you use the remote diagnosis system, and user authentication and account
track is installed on this machine.
16.10.3 Sending the machine operating status
When using a service that diagnoses the machine status remotely, send the operating status of this machine
to the remote diagnosis system.
In the administrator mode, select [Maintenance] - [Call Remote Center], then click [Call Remote Center].
Tips
- This setting is available if you use the remote diagnosis system.
Settings Description
[Proxy Setting for Re-
mote Access] Select [ON] to use a proxy server for remote diagnosis.
[OFF] is specified by default.
[Proxy Settings] Configure the proxy server used for remote diagnosis
[Syn-
chronize
WebDAV
Client
Setting] Select whether to use the proxy server used for WebDAV transmission as a
proxy server for remote diagnosis.
To use a different proxy server for remote diagnosis, select [OFF] and enter the
proxy server information.
[ON] is specified by default.
[Proxy
Server
Address] Enter the proxy server address.
Use one of the following formats.
•
Example of host name entry: "host.example.com"
• Example of IP address (IPv4) entry: "192.168.1.1"
• Example of IP address (IPv6) entry: "fe80::220:6bff:fe10:2f16"
[Proxy
Server
Port
Number] If necessary, enter the proxy server port number.
[User
Name] Enter the user name to log in to the proxy server (using up to 63 characters).
[Pass-
word] Enter the password of the user name you entered into [User Name] (using up to
63 characters).
To enter (change) the password, select the [Password is changed.] check box,
then enter a new password.