Sindoh D310 Series, User Manual, Page: 161 / 324

12.5 Employing the NTLM authentication 12
[Web Management Tool] 12-14
2
In the administrator mode, select [User Auth/Account Track] - [General Settings], then configure the fol-
lowing settings.
Settings Description
[User Authentication] When performing authentication using an external authentication server, select
[ON (External Server)] or [ON (MFP + External Server)].
If you want to configure setting so that you can log in to this machine using its
authentication function in consideration of an occurrence of some sort of prob-
lem on the external authentication server, select [ON (MFP + External Server)].
[Overwrite User Info] When the external server authentication is used, authenticated user informa-
tion is also managed on this machine. If the number of users who have execut-
ed the external server authentication reaches the maximum number of users
this machine can manage, authentication of any new users will not be permit-
ted. Select whether to allow the user to overwrite registered user information
for that case.
If you select [Allow], the oldest authenticated user information is erased and
the new user is registered.
[Restrict] is specified by default.
[Default Authentication
Method] If you have selected [ON (MFP + External Server)] at [User Authentication], se-
lect the authentication method you use normally.
[ON (External Server)] is specified by default.
[When Number of Jobs
Reach Maximum] Sets the maximum number of sheets that each user can print. Here, select an
operation if the number of sheets exceeds the maximum number of sheets that
can be printed.
•
[Skip Job]: Stops the job currently running, and starts printing the next job.
• [Stop Job]: Stops all jobs.
• [Delete Job]: Deletes the active job.
[Skip Job] is specified by default.
[Temporarily Save Au-
thentication Informa-
tion] To temporarily save authentication information in the main unit against a case
where an external authentication server shuts down, select [Enable].
[Disable] is specified by default.
[Reconnection Set-
tings] If necessary, change the time to reconnect to the authentication server.
•
[Reconnect for every login]: Connects to the authentication server at the
time authentication is carried out on this machine. If the authentication
server is in the shutdown state at the time authentication is carried out on
this machine, first confirm that the authentication server is down, and use
the temporarily saved authentication information to log in to this machine.
• [Set Reconnect Interval]: Connect to the authentication server at the time
specified in [Reconnection Time], and check the status of the authentica-
tion server. If the authentication server is in the shutdown state, use the au-
thentication information temporarily saved in the main unit to log in.
[Set Reconnect Interval] is specified by default.
[Expiration Date Set-
tings] Select [Enable] to set the expiration date to the temporarily saved authentica-
tion information. If [Enable] is selected, enter the expiration date.
[Disable] is specified by default.