Sindoh D310 Series, User Manual, Page: 239 / 324

14.6 Managing the machine via SNMP 14
[Web Management Tool] 14-14
[Context
Name] Enter the context name (using up to 63 characters, excluding spaces, \, ', ", and
#).
[Discov-
ery User
Name] Select this check box if you allow a user for detection. Enter a user name for
detection (using between 1 to 32 characters, excluding spaces, \, ', ", and #).
[Read
User
Name] Enter a read-only user name (using up to 32 characters, excluding spaces, \, ',
", and #).
[Security
Level] Select a security level for the read-only user.
[auth-
pass-
word] If [auth-password] or [auth-password/priv-password] is selected from [Security
Level], enter an authentication password for the read-only user (using between
8 to 32 characters, excluding spaces, \, ', ", and #).
To enter (change) the password, select the [Password is changed.] check box,
then enter a new password.
[priv-
pass-
word] If [auth-password/priv-password] is selected from [Security Level], enter a
password used for privacy (encryption) of the read-only user (using between 8
to 32 characters, excluding spaces, \, ', ", and #).
To enter (change) the password, select the [Password is changed.] check box,
then enter a new password.
[Write
User
Name] Enter a user name used of the read and write user (using up to 32 characters,
excluding spaces, \, ', ", and #).
[Security
Level] Select a security level of the read and write user.
[auth-
pass-
word] If [auth-password] or [auth-password/priv-password] is selected from [Security
Level], enter an authentication password for the read and write user (using be-
tween 8 to 32 characters, excluding spaces, \, ', ", and #).
To enter (change) the password, select the [Password is changed.] check box,
then enter a new password.
[priv-
pass-
word] If [auth-password/priv-password] is selected from [Security Level], enter a
password used for privacy (encryption) of the read and write user (using be-
tween 8 to 32 characters, excluding spaces, \, ', ", and #).
To enter (change) the password, select the [Password is changed.] check box,
then enter a new password.
[Encryption Algorithm] Select an encryption algorithm.
[Authentication Meth-
od] Select an authentication method.
[TRAP Setting] Set TRAP function to notify of the machine status using the SNMP TRAP func-
tion.
[Allow
Setting] Select [Allow] to use the SNMP TRAP function.
[Trap
Setting
when Au-
thentica-
tion Fails] Select whether to send TRAP when authentication fails.
[Administrator Infor-
mation] If necessary, enter the information of this machine.
[Device
Name] Enter the name of this machine (MIB sysName) (using up to 255 characters).
[Device
Location] Enter the location where to install this machine (MIB sysLocation) (using up to
255 characters).
[Adminis-
trator
Name] Enter the administrator name (MIB sysContact) (using up to 255 characters).
Settings Description