Polaris RANGER XP 1000 2018-2019, Service Manual

Page: 192 / 561

3.112
9929399 R01 - 2018-2019 RANGER XP/ CREW 900/1000 Service Manual
© Copyright Polaris Industries Inc.
7. Rotate water pump drive tab so it matches the angle
of the drive slot in the engine.
CAUTION
The water pump drive tab and slot must be aligned
properly during installation. Severe engine or water
pump damage will occur if the tab and slot are not in
alignment during water pump installation.
8. Slide water pump into engine crankcase.
9. Be sure water pump is fully seated and the drive tab
and slot are properly engaged.
10. Install the three water pump mounting bolts, noting
location of shorter bolt and torque to specification.
TORQUE
Water Pump Mounting Bolts:
7 lb-ft (10 Nm)
11. Install the three coolant hoses that attach to the
water pump. Be sure orientation and routing are
correct.
12. Install the exhaust system as outlined in this chapter.
13. Connect the (-) negative battery cable.
14. Fill and bleed cooling system as outlined in this
chapter.
15. Install the hood, storage bin and passenger seat
base (Body / Frame Chapter).
ENGINE / COOLING / HVAC SYSTEM