Polaris RANGER XP 1000 2018-2019, Service Manual

Page: 514 / 561

11.22
9929399 R01 - 2018-2019 RANGER XP/ CREW 900/1000 Service Manual
© Copyright Polaris Industries Inc.
6. Install the harness onto the new headlight bulb and
install the hood.
HEADLIGHT HOUSING REMOVAL
1. Remove the hood from the front cab.
2. Remove the Torx-head screw
q
and push rivet
w
retaining the upper right portion of the front fender.
3. Carefully lift up the front fender far enough to access
the entire headlight housing.
4. Disconnect the harness from the bulb. Refer to
“Headlight Bulb Replacement”page 11.21
procedure.
5. Remove the O-rings from each side of the headlight
housing.
6. Remove the adjustment screw.
7. Carefully push on the face of the headlight housing
to disengage the housing tabs from the front fascia
brackets.
8. Remove the headlight housing from the vehicle.
HEADLIGHT HOUSING INSTALLATION
1. Install the headlight housing by pressing the housing
tabs back into the front fascia brackets.
2. Secure the headlight housing with the rubber O-rings
on each side. Install the adjustment screw.
NOTICE
Be sure to twist the O-rings upon installation as shown
below.
3. Connect the harness to the bulb.
4. Install the Torx-head screw
q
and push rivet
w
retaining the upper right portion of the front fender.
5. Install the hood.
6. Adjust headlights using the “Headlight
Adjustment” procedure.
ELECTRICAL