Polaris RANGER XP 1000 2018-2019 Service Manual Download Page 207

Page: 207 / 561

9929399 R01 - 2018-2019

RANGER

XP/ CREW 900/1000 Service Manual

3.127

HVAC SYSTEM SERVICE

COMPRESSOR DRIVE BELT REPLACEMENT

SERVICE VIDEO

A service video has been created
to help highlight this procedure.
To view the video, either:

• Scan the QR Code with a

mobile device

• From a computer, right click

HERE

and open link in a new

window.

IMPORTANT

The compressor drive belt is a single use belt as it

stretches onto the pulleys during installation. Do NOT

reuse a drive belt that has been removed. Always

replace with a NEW belt.

1. Position the vehicle on a level surface, place the

transmission in PARK and stop the engine.

2. Tilt the rear cargo box to the upright position.

3. Remove the fasteners holding the alternator cover to

the vehicle.

4. Cut the compressor drive belt to remove it from the

vehicle.

5. To aid with belt installation, remove the fasteners

holding the inner alternator cover to the engine.
Disconnect the air outlet hose and remove the cover
from the vehicle.

6. Loosen the three alternator fasteners enough to slide

the alternator outward with enough room for the
compressor drive belt to slide belt.

ENGINE / COOLING / HVAC SYSTEM

Summary of Contents for RANGER XP 1000 2018-2019


















































































































































































































































































































































































































































































































































































Search results

Summary of Contents for RANGER XP 1000 2018-2019

Reviews:

Related manuals for RANGER XP 1000 2018-2019

Brands by name

Popular brands

Polaris RANGER XP 1000 2018-2019, Service Manual

Search results

Summary of Contents for RANGER XP 1000 2018-2019

Reviews:

Related manuals for RANGER XP 1000 2018-2019

Brands by name

Popular brands