Polaris RANGER XP 1000 2018-2019, Service Manual

Page: 481 / 561

10
9929399 R01 - 2018-2019 RANGER XP/ CREW 900/1000 Service Manual
© Copyright Polaris Industries Inc.
10.27
CARGO BOX REMOVAL
1. Pull the lever and tilt the rear cargo box.
2. Pull the clip (A) and remove the pin at the upper
cargo box shock mount.
3. Disconnect the tail light harness connector (B) from
the main harness.
4. Remove the clip and pin at the bottom shock mount
for replacement or removal of cargo box shock.
CAUTION
Safely support the box during the remainder of the
removal process. The box is not as stable with the
shock removed.
5. Remove the two hinge fasteners that retain the cargo
box to the frame.
CAUTION
Use caution when removing the box. It is recommended
to have two people carefully remove the box from the
frame.
6. Lift the cargo box from the frame. Two people or an
appropriate overhead hoist may be needed to
remove the box from the frame.
CARGO BOX INSTALLATION
1. Place the cargo box onto the frame. Align the hinges
of the box with the bracket on the frame.
2. Install the cargo box hinge fasteners on both sides
and torque to specification.
TORQUE
Cargo Box Hinge Fasteners:
14 lb-ft (19 Nm)
3. With the hinge bolts installed, attach the shock to the
cargo box by inserting the pin and clip.
4. Connect the tail light harness connector to the main
harness.
5. Lower the box and secure the latch.
CARGO BOX KIT REMOVAL /
INSTALLATION (PKG ONLY)
Unhook the LOCK & RIDE anchors that hold the cargo
box kit in the rear cargo box.
BODY / FRAME