Omron Sysmac NX1P2-10 1 Series, User Manual

Page: 525 / 578

Precautions for Correct Use
When you use the Sysmac Studio version 1.10 or lower, create the connections again if you
changed the target device after configuring the connection settings.

Changing the IP Addresses for All Target Devices
1
Right-click one of the connection lines and select Change Node Address from the menu.
2
The Node Address Change Dialog Box is displayed. Enter a new IP address in New IP
address .
To apply the same change to other connections, select the Apply the change to other
connections Check Box.
3
To apply the same change to other connections, select the Apply the change to other
connections Check Box.
4
Click the OK Button.

Changing All Target Device Information including Model Names and Revi-
sions
1
Right-click one of the connection lines and select Change Target Device from the menu.
2
The Target Device Change Dialog Box is displayed. Select a target device from New device .
Appendices
A-21
NJ/NX-series CPU Unit Built-in EtherNet/IP Port User’s Manual (W506)
A-2 Use the Sysmac Studio to Set the T
ag Data Links (EtherNet/IP Connections)
A
A-2-4 Making the EtherNet/IP Connection Settings with the Sysmac Stu- dio