Omron Sysmac NX1P2-10 1 Series, User Manual

Page: 168 / 578

5-6 SNMP Trap Settings Display

SNMP Trap
Setting Description Default
SNMP trap Specify whether to use the SNMP trap (network error detec-
tion).
*1
If the Do not use Option is selected for SNMP trap, SNMP traps
are not sent to the SNMP manager
Do not use
Port No.
*2
Set the port number to use to connect to the SNMP server.
It is normally not necessary to change this setting. 162
*1. If you specify to use the SNMP trap, you also have to set Trap 1 and Trap 2 as described below.
*2. The following ports are used by the system and cannot be set by the user: 25, 53, 68, 110, 2222, 2223,
2224, 9600, and 44818.
Additional Information
Refer to 14-1-1 Overview on page 14-2 for details on the SNMP trap.

Trap 1
If the Use Option is selected for SNMP trap , you need to make the following settings.
Setting Description Default
Specifying method Set the specifying method for the SNMP manager destination for
SNMP traps.
•
IP address
•
Host name
IP address
IP address Set the IP address of the SNMP manager.
(Set this setting if the
Specifying method in the Trap 1 settings
is set to the IP address Option.)
None
Host name Set the host name of the SNMP manager.
(Set this setting if the
Specifying method in the Trap 1 settings
is set to the Host name Option.)
(Single-byte alphanumeric characters, dots, and hyphens: 200
characters max. with up to 63 single-byte alphanumeric charac-
ters between dots.)
None
5 Sysmac Studio Settings for the Built-in EtherNet/IP Port
5-14
NJ/NX-series CPU Unit Built-in EtherNet/IP Port User’s Manual (W506)