Omron Sysmac NX1P2-10 1 Series, User Manual

Page: 169 / 578

Setting Description Default
Community name Set the community name.
(You can use up to 255 single-byte alphanumeric characters.) public
Version Set the version of the SNMP manager.
•
SNMPv1
•
SNMPv2C
SNMPv1

Trap 2
If the Use Option is selected for SNMP trap , you need to make the following settings.
Setting Description Default
Trap 2 Specify whether to use the Tap 2 settings.
•
Use
•
Do not use
Do not use
Specifying method Set the specifying method for the SNMP manager destination for
SNMP traps.
•
IP address
•
Host name
IP address
IP address Set the IP address of the SNMP manager.
(Set this setting if the
Specifying method in the Trap 2 settings
is set to the IP address Option.)
None
Host name Set the host name of the SNMP manager.
(Set this setting if the
Specifying method in the Trap 2 settings
is set to the Host name Option.)
(Single-byte alphanumeric characters, dots, and hyphens: 200
characters max. with up to 63 single-byte alphanumeric charac-
ters between dots.)
None
Community name Set the community name.
(You can use up to 255 single-byte alphanumeric characters.) public
Version Set the version of the SNMP manager.
•
SNMPv1
•
SNMPv2C
SNMPv1
5 Sysmac Studio Settings for the Built-in EtherNet/IP Port
5-15
NJ/NX-series CPU Unit Built-in EtherNet/IP Port User’s Manual (W506)
5-6 SNMP T
rap Settings Display
5