Omron Sysmac NX1P2-10 1 Series, User Manual

Page: 511 / 578

The name and size of the tag must be the same as those of the network variable
*1
. Set whether to
include the Controller status information in tags for the tag sets. You can also set the data output
operation at a fatal error occurrence for output tags.
Refer to
Registering the Tag and Tag Set on page A-11 for information on how to register tags and
tag sets.
*1. A variable with its Network Publish attribute set to Output or Input in the Global Variable Table is called a
network variable.
EtherNet/IP Connection Settings (Connection Display)
Specify the target devices and set their connections.
For each connection, set the following information: Connection Name, Connection I/O Type, I/O, target
device tag set (target variable), originator device tag set (originator variable), Packet Interval (RPI),
and Timeout Value.
Refer to
Setting Connections for the Originator Device on page A-14 for information on how to make
connection settings.
Precautions for Correct Use
If you changed the IP address, model or revision of the target device after making the connec-
tion settings, perform the following.
With the Sysmac Studio version 1.11 or higher, change the connection settings entirely.
With the Sysmac Studio version 1.10 or lower, create the connections again.
Appendices
A-7
NJ/NX-series CPU Unit Built-in EtherNet/IP Port User’s Manual (W506)
A-2 Use the Sysmac Studio to Set the T
ag Data Links (EtherNet/IP Connections)
A
A-2-3 EtherNet/IP Connection Settings