manualshive.com logo in svg

Omron Sysmac NX1P2-10 1 Series, User Manual

Share
Download
Omron Sysmac NX1P2-10 1 Series User Manual Download Page 52

Indicator

Col

or

Status

Operating status

NET ERR

---

Not lit

There are no Ethernet communications errors.

•

The power supply is OFF or the Controller is reset.

Re
d

Flash-
ing

A user-recoverable error is occurring.

•

An error is occurring in TCP/IP communications or CIP communications.

•

FTP Server Setting Error, NTP Server Setting Error, etc.

•

Tag Data Link Setting Error, Tag Data Link Verification Error, etc.

•

The same IP address is assigned to more than one node.

Lit

A user-non-recoverable error is occurring.

•

A MAC address error or communications Controller error is occurring.

LINK/ACT

---

Not lit

The link is not established.

•

The cable is not connected.

•

The power supply is OFF or the Controller is reset.

Yel
low

Flash-
ing

Data communications in progress after establishing the link.

Lit

Link established.

Additional Information

When the built-in EtherNet/IP port is set to be disabled, all the indicators are turned OFF.
Refer to 

5-1 TCP/IP Settings Display

 on page 5-2 for details on the settings of a built-in

EtherNet/IP port.

1 Introduction

1-18

NJ/NX-series CPU Unit Built-in EtherNet/IP Port User’s Manual (W506)

Summary of Contents for Sysmac NX1P2-10 1 Series



































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands