manualshive.com logo in svg

Omron Sysmac NX1P2-10 1 Series, User Manual

Share
Download
Omron Sysmac NX1P2-10 1 Series User Manual Download Page 3

Introduction

Thank you for purchasing an NJ/NX-series CPU Unit.
This manual contains information that is necessary to use the NJ/NX-series CPU Unit. Please read
this manual and make sure you understand the functionality and performance of the NJ/NX-series
CPU Unit before you attempt to use it in a control system.
Keep this manual in a safe place where it will be available for reference during operation.

Intended Audience

This manual is intended for the following personnel, who must also have knowledge of electrical sys-
tems (electrical engineers or the equivalent).
• Personnel in charge of introducing FA systems.
• Personnel in charge of designing FA systems.
• Personnel in charge of installing and maintaining FA systems.
• Personnel in charge of managing FA systems and facilities.
For programming, this manual is intended for personnel who understand the programming language
specifications in international standard IEC 61131-3 or Japanese standard JIS B 3503.

Applicable Products

This manual covers the following products.

•

NX-series CPU Units

•

NX701-17

££

•

NX701-16

££

•

NX102-12

££

•

NX102-11

££

•

NX102-10

££

•

NX102-90

££

•

NX1P2-11

££££

•

NX1P2-11

££££

1

•

NX1P2-10

££££

•

NX1P2-10

££££

1

•

NX1P2-90

££££

•

NX1P2-90

££££

1

•

NX1P2-9B

££££

•

NX1P2-9B

££££

1

•

NJ-series CPU Units

•

NJ501-

£

5

££

•

NJ501-

£

4

££

•

NJ501-

£

3

££

•

NJ301-12

££

•

NJ301-11

££

•

NJ101-10

££

•

NJ101-90

££

Part of the specifications and restrictions for the CPU Units are given in other manuals.
Refer to 

Relevant Manuals

 on page 2 and 

Related Manuals

 on page 27.

Introduction

1

NJ/NX-series CPU Unit Built-in EtherNet/IP Port User’s Manual (W506)

Summary of Contents for Sysmac NX1P2-10 1 Series



































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands