![background image](http://html1.mh-extra.com/html/omron/cx-process-monitor-plus-2/cx-process-monitor-plus-2_operation-manual_744195080.webp)
65
Example Function Blocks for Data Exchange
Section 3-2
The following settings are made in this example.
2. Exchanging Analog Signal Data
2-1 Setting Analog Data from Monitor Plus
Example: Setting the Basic PID block’s RSP value from Monitor Plus
This step registers a function block that inputs an analog signal from Monitor
Plus to the Basic PID block. In this case, an analog input is being sent from
Monitor Plus, so the Constant Generator (Block Model 166) is registered and
connected.
Setting the Tag for Monitor Plus
This step sets the tags for Monitor Plus needed to set an analog signal in the
Constant Generator (Block Model 166) from Monitor Plus. This tag is specified
from Monitor Plus to set the analog value.
ITEM
Send All Blocks
(Block Model 462)
Receive All Blocks
(Block Model 461)
Data area
3:D (DM area)
Leading address
00000
10000
Number of Control blocks
32 (default setting)
Number of Operation blocks
5 (Five are used in this example.)
Number of External Controller
blocks
0
PV
(Feedback from
the whole system)
This function block is registered and connected
to input an analog signal from Monitor Plus.
Summary of Contents for CX-Process Monitor Plus 2
