![background image](http://html1.mh-extra.com/html/omron/cx-process-monitor-plus-2/cx-process-monitor-plus-2_operation-manual_744195056.webp)
41
Installation
Section 2-1
Click the
Install
Button.
The installation will be started by the installation program.
To check or make changes to the installation contents, click the
Return
Button.
To abort the installation, click the
Cancel
Button.
8.
When the installation has been completed, the following dialog box will be
displayed. Click the
Finish
Button.
Note
Windows may have to be restarted after the installation. If required, restart
Windows in response to the Install Shield Wizard message.
9.
After the computer has been restarted, a ReadMe file will be displayed.
Note
Be sure to read the ReadMe file before using CX-Process Monitor Plus.
This completes the CX-Process Monitor Plus installation.
2-1-5
Converting CX-Process Monitor Plus Data
The following procedure must be used to convert data from the CX-Process
Monitor Plus software currently installed in the computer so that it can be
used with the new CX-Process Monitor Plus version.
Check the CX-Process
Monitor Plus version.
Check the version of the CX-Process Monitor Plus program currently installed
on the computer.
Move the CX-Process
Monitor Plus database.
Move the folder where data is saved for the CX-Process Monitor Plus program
currently installed on the computer to a safe location. (See note 1.)
Note
This is the folder set for the database path in the File System Setup. The
default setting is C:\Program Files\Omron\CX-Process Monitor Plus\DB.
Convert the CX-Process
Monitor Plus database
(using the Trend DB
Conversion Utility).
Use the Trend DB Conversion Utility to convert the trend group definition file
for use with the new version of CX-Process Monitor Plus.
1,2,3...
1.
Start the Trend DB Conversion Utility. The Trend DB Conversion Utility is
stored at the following location:
CD-ROM drive:\MonitorPlusUpDate\UpDatePlusV2.exe
The following dialog box will be displayed:
Summary of Contents for CX-Process Monitor Plus 2
