![background image](http://html1.mh-extra.com/html/omron/cx-process-monitor-plus-2/cx-process-monitor-plus-2_operation-manual_744195096.webp)
81
Screen Configurations
Section 4-6
4-6
Screen Configurations
This section explains the configuration of the CX-Process Monitor Plus
Screen as a whole. The following example shows the Overview Screen.
Note
The bottom line will appear as follows for some screens.
Screen Selection Buttons: Right-click
here to confirm the CRT-ID, group
number, and position of the screen
specified for automatic startup.
Refer to the table below for each
button's function.
When a new message
appears in the
Operation Guide
Screen, a red mark is
displayed, and a
buzzer will sound at
the same time.
System Monitor Message Display Area:
Displays the most recent System Monitor
message, and a buzzer will sound at the same
time. The message is stored in the System
Monitor Log.
Click the Button to delete the message.
The buzzer will also stop at the same time.
Alarm Message
Display Area:
Displays the most
recent alarm
message, and a
buzzer will sound at
the same time. The
message is stored on
the Alarm Log screen.
Click the Button
to delete the
message. The
buzzer will also stop
at the same time.
This area displays
all the Monitor
Screens. The
example shows the
Overview Screen.
Use the Screen
Selection Buttons to
change the display.
Displays the date and time
Return to previous screen
Click here and then set a tag
name to select any Tuning
Screen.
Use these buttons to
start any external
applications that have
been set.
Prints a hardcopy of the screen.
Prints error log data on Operation Guide
Screen, Alarm Log Screens, Operation
Log Screens, and System Monitor Log
Screens.
Summary of Contents for CX-Process Monitor Plus 2
