190
Screen Configuration
Section 5-5
4.
Input the screen name.
5.
Set the batch trend basic settings as shown below.
Select the batch trend
collection cycle (1 or 60 s).
Select the operation for when the trigger condition is
satisfied for collecting data when the CX-Process Monitor
Plus is restarted.
•
Selected:
Continue collecting data to the same batch trend file when
the CX-Process Monitor Plus is restarted.
•
Not selected:
Begin collecting data to a new batch trend file when the
CX-Process Monitor Plus is restarted.
•
Set the tag to serve as a trigger for start
collecting trend data.
Note:
The trigger tag setting is not re-
quired. Trend data collection can al-
so be started using a procedure
from the Batch Trend Screen.
•
Click the box to display the dialog box
shown below.
•
Select the tag ITEM for the analog ITEM
that is to be registered. In this example, a
tag ITEM (PV) with the tag name
"UL_3001_00" is selected.
•
Displayed when a trigger tag ITEM is set.
•
Click the box to display one of the following dialog boxes according to the
type of ITEM (analog or contact) that is selected.
•
Analog ITEM:
Set the batch start and stop values.
If the batch start value is greater than the batch stop value:
Batch collection will start when the trigger ITEM value is equal to or
greater than the batch start value.
Batch collection will stop when the trigger ITEM value is less than the
batch stop value.
If the batch start value is less than the batch stop value:
Batch collection will start when the trigger ITEM value is less than the
batch start value.
Batch collection will stop when the trigger ITEM value is equal to or
greater than the batch stop value.
•
Contact ITEM:
Set the condition (either when ON or when OFF) for starting the batch
collection.
Summary of Contents for CX-Process Monitor Plus 2
