![background image](http://html1.mh-extra.com/html/omron/cx-process-monitor-plus-2/cx-process-monitor-plus-2_operation-manual_744195130.webp)
115
Segment Program 2 Screens
Section 4-11
3.
The Vertical axis settings Dialog Box will be displayed. Set the vertical axis
display.
Note
When changing the scaling settings in the CRT Builder's Segment Program 2
settings screen, change the upper and lower limit settings in the Vertical axis
settings Dialog Box to match the new scaling values.
Changing Parameters
Change the following parameters for the Segment Program 2 Function Block.
• Stop block operation command (ITEM 000)
• Reference input disable (ITEM 020)
1,2,3...
1.
Click the
Stop Block
and
Reference
Buttons in the Segment Program 2
Monitor Screen.
2.
The Change data Dialog Box will be displayed. Input the new value.
3.
Click the
OK
Button. The new value will be reflected in the parameters for
the Segment Program 2 Function Block.
Set the number of divisions.
Set the upper and lower limits.
Click to change the value of the
Stop Block command (MF_ST).
Click to change the value of the
Reference Input Disable Switch (S5).
Input the new value here.
In this example, the dialog box for
the Stop Block command (MF_ST)
is shown.
Summary of Contents for CX-Process Monitor Plus 2
