![background image](http://html1.mh-extra.com/html/omron/cx-process-monitor-plus-2/cx-process-monitor-plus-2_operation-manual_744195226.webp)
211
System Information Settings
Section 5-6
Setting Procedure
1,2,3...
1.
Select
Block Model
. The Function Blocks will be displayed below it.
2.
To set key locks for all the analog and contact ITEMs of the Function Blocks
of the specified Block Model that can usually be changed using CX-Pro-
cess Monitor Plus, click the
All Select
Button. Similarly, to clear the key
locks for all of the ITEMs, click the
All Clear
Button.
To set key locks for specific ITEMs, click in the check box of the required
ITEMs in either the analog ITEM or Contact ITEM fields.
3.
Click the
Save and exit
Button to enable the key lock settings.
Operation with Key Locks Enabled
1,2,3...
1.
If an attempt to change the value of an ITEM (e.g., SP) for which key lock
has been set (e.g., by pressing the
SP
Button), the following dialog box will
be displayed.
2.
If
Yes
is clicked, the following dialog box, requesting entry of a password,
will be displayed. (If
No
is clicked, the operation to change the ITEM will be
cancelled.)
Summary of Contents for CX-Process Monitor Plus 2
