![background image](http://html1.mh-extra.com/html/omron/cx-process-monitor-plus-2/cx-process-monitor-plus-2_operation-manual_744195137.webp)
122
Segment Program 2 Screens
Section 4-11
2.
The Step Settings Dialog Box will be displayed.
Input the values to be set for each step and click the
Change
Button.
The graph display will be updated at that point, but the new settings will not
be sent to the Loop Controller.
3.
After the changes have been completed, click the
Close
Button to close
the Step Settings Dialog Box.
Transferring Edited Step
Data to the Loop
Controller
Use the following procedure to transfer the step data edited on the Segment
Program 2 Edit Screen to the Loop Controller.
!WARNING
Transferring segment data while the Segment Program 2 function block or
function blocks that are affected by Segment Program 2 outputs are running
may affect the outputs from these function blocks.
Transferring data without first confirming the results may cause unexpected
operation of the controlled equipment.
1,2,3...
1.
Click the
Write
Button on the Segment Program 2 Edit Screen.
2.
The following dialog box will be displayed.
Confirm the effects of writing the step data, and then click the
Yes
Button
to start the transfer.
Reading Step Data from
the Loop Controller
Use the following procedure to read the step data currently registered to the
Loop Controller.
1,2,3...
1.
Click the
Read
Button on the Segment Program 2 Edit Screen.
The number of the step to be edited is
displayed here. (Step 0 is displayed as
the initial value.)
The step data prior to editing
is displayed here.
Input the new values.
Moves to the edit screen
for the previous step.
Reflects the changed data in the
graph display.
Moves to the edit screen
for the next step.
Summary of Contents for CX-Process Monitor Plus 2
