74
Outline
Section 4-1
4-1
Outline
This section explains the functions and operations for each screen primarily
for those people who will operate CX-Process Monitor Plus. The explanations
assume that CX-Process Tool settings and screen configuration for the CX-
Process Monitor Plus have already been completed.
Refer to
SECTION 5 Configuration Screens
for how to configure CX-Process
Monitor Plus screens. Also, refer to the
CX-Process Tool Operation Manual
(W372) for CX-Process Tool settings.
CX-Process Monitor Plus screen configuration is already completed, monitor
the Loop Control Unit/Board mainly by performing the following operations.
1,2,3...
1.
Start CX-Process Monitor Plus (refer to
4-4 Starting and Stopping the CX-
Process Monitor Plus
).
2.
In the CX-Process Monitor Plus Main Window, click the
Run
Button to dis-
play the Overview Screen (refer to
4-5 Overview Screen
).
3.
From the Overview Screen, move to each of the following screens.
• Control Screen (see
4-7 Control Screens
)
• Tuning Screen (see
4-8 Tuning Screens
)
• Trend Screen (see
4-9 Trend Screens
)
• Batch Trend Screen (see
4-10 Batch Trend Screens
)
• Segment Program 2 Screen (see
4-11 Segment Program 2 Screens
)
• Graphic Screen (see
4-12 Graphic Screens
)
• Annunciator Screen (see
4-13 Annunciator Screens
)
• Operation Guide Screen (see
4-14 Operation Guide Screens
)
• Alarm Log Screen (see
4-15 Alarm Log Screens
)
• Operation Log Screen (see
4-16 Operation Log Screens
)
• System Monitor Screen (see
4-17 System Monitor Screens
)
• System Monitor Log Screen (see
4-18 System Monitor Log Screens
)
4-2
Using the CX-Process Monitor Plus
Preparations on the CX-Process Tool
1,2,3...
1.
Set the network address, node address, and unit address.
2.
Register the function blocks for data exchange with the CX-Process Mon-
itor Plus.
3.
Set CSV tags and tags for the CX-Process Monitor Plus.
4.
Generate the tag file for Monitor Plus.
5.
Download the function block data to the Loop Control Unit/Board.
Operations on the CX-Process Monitor Plus
6.
Start the CX-Process Monitor Plus.
7.
In the Main Window, click the
Run
Button to compile the monitor tag file.
(See note.)
8.
In the Overview Screen, select
Control Screen
,
Trend Screen
, etc. as re-
quired.
Note
Steps 7. will not be required and a specified screen will be displayed if auto-
starting is enabled. Autostarting can be enabled by clicking the
System Info.
Button when configuring the screen and then setting the Auto-start–Auto-start
setting to
Enable
.
Summary of Contents for CX-Process Monitor Plus 2
