149
Creating Graphic Screens
Section 5-4
Creating Graphic Screens
Graphic objects are placed on Graphic Screens. The object placed on a
Graphic Screen in this example is a data box.
1,2,3...
1.
Select
Insert Functional Object
-
Data
(or click the
icon on the Ob-
ject Toolbar).
The data box will be displayed on the top left of the screen as shown below.
2.
Double-click the data box to select it, and drag it to the display position.
3.
Drag any of the eight points on the data box frame to enlarge or reduce its
size.
4.
Right-click the data box and select
Properties - GrfData2 Control Object
from the pop-up menu.
5.
The GrfData2 Control Properties Dialog Box will be displayed. Make the
settings for the data box and click the
OK
Button.
For details on setting graphic objects, refer to
5-4-6 Setting Graphic Ob-
jects
.
6.
Place other graphic objects using the same procedure as above.
Saving Graphic Screens
Graphic Screens that have been created are saved one by one.
1,2,3...
1.
Select
Save
or
Save As
from the File Menu, or click the
icon.
2.
The following dialog box will be displayed. Input the file name and click the
Save
Button.
One Graphic Screen will be saved (with a GRF file name extension).
Summary of Contents for CX-Process Monitor Plus 2
