![background image](http://html1.mh-extra.com/html/omron/cx-process-monitor-plus-2/cx-process-monitor-plus-2_operation-manual_744195158.webp)
143
Basic Configuration Operations
Section 5-2
3.
Enter the password, and click the
OK
Button.
The following dialog box will be displayed.
4.
Enter the password once again, and click the
OK
Button.
Note
If you have forgotten the password or want to change the password, perform
the following operation using the Registry Editor, and after deleting the Pass-
Word key, set the password once again using the above procedure.
1,2,3...
1.
Click the
Start
Button, click the
Run
Button, enter
regedt
, and then click
the
OK
Button.
The Registry Editor will start.
2.
On the local computer, select HKEY_LOCAL_MACHINE\SOFT-
WARE\OMRON\CX-Process Monitor Plus\2.00, and then delete the pass-
word.
5-2-3
Setup Dialog Box
This section explains the functions of the Setup Dialog Box.
1,2,3...
1.
In the Main Window, click the
Setup
Button.
A dialog box will be displayed to input the password. If no password has
been set, the Setup Dialog Box will not be displayed. For details on setting
a password, refer to
5-2-2 Setting Passwords
.
2.
Enter the password, and click the
OK
Button.
The Setup Dialog Box will be displayed.
3.
Click any button, and then select a function.
Summary of Contents for CX-Process Monitor Plus 2
