![background image](http://html1.mh-extra.com/html/omron/cx-process-monitor-plus-2/cx-process-monitor-plus-2_operation-manual_744195225.webp)
210
System Information Settings
Section 5-6
5-6-4
Color Settings
In the leftmost window, select
Set color
. The following screen will be dis-
played.
Use the above screen to specify the color used for the AUT/MAN/CAS/FIELD/
CONT/PAUSE/START/STOP/RESET Function Block diagrams, the Contact
output buttons, and the Contact input status.
If the
Display dialog box for confirming in pushing contact buttons
set-
ting is clicked, a confirmation dialog box like the one shown below will be dis-
played to confirm operation when a contact output button, like AUTO/MAN is
clicked.
5-6-5
Key-lock Settings
In the leftmost window, select
Set key lock
. The following screen will be dis-
played.
It is possible to prohibit changing specified ITEM values (e.g., changing SP
values or PID constants) of specified Function Blocks (e.g., Basic PID Block)
in screens, such as the Control Screen and the Tuning Screen, that can be
using for setting operations from the CX-Process Monitor Plus. These settings
are called “key locks.”
Note
Key-lock specifications are made in terms of block models (setting in terms of
the CX-Process Monitor Plus’s tag names is not possible).
Color setting for the buttons used in the AUT/MAN/CAS/FIELD/CONT/PAUSE/START/STOP/RESET
Function Block diagrams
Color used to indicate
button is ON.
Color used to indicate
button is OFF.
Color used to indicate
button is ON.
Color used to indicate
button is OFF.
Color used to indicate
Contact input is ON.
Color used to indicate
Contact input is OFF.
Color of Contact
output button
Color of Contact
input status
Summary of Contents for CX-Process Monitor Plus 2
