![background image](http://html1.mh-extra.com/html/omron/cx-process-monitor-plus-2/cx-process-monitor-plus-2_operation-manual_744195025.webp)
10
CX-Process Monitor Plus
Section 1-1
System Monitor Screens
Use this screen to display the system status, and run/stop the Loop Control
Unit/Board.
System Monitor Log
Screens
Use this screen to display the run/stop history and Execution error history, and
to record the time at which they occurred.
1-1-3
CX-Process Monitor Plus System Requirements
FinsGateway
As shown below, the CX-Process Monitor Plus uses the communications
driver FinsGateway (Embedded version) to communicate with the PLC (Pro-
grammable Controller) mounted to the Loop Control Unit/Board.
Software
Hardware
CX-Process Tool
CX-Process Monitor Plus
FinsGateway (Embedded version)
RS-232C port
Controller Link
Support Board
Ethernet board
Summary of Contents for CX-Process Monitor Plus 2
